Table of Content
If you want to output TV sound only from the external output device , decrease the TV volume to the lowest level or mute it. The steps below are an example on Android TV or Google TV. Open the Settings screen.Using the Quick Settings button 1.
Even if your receiver has an automatic speaker setup or room correction system, having a sound meter for manual tweaking can't hurt. First, connect the audio/video output of the box directly to the TV. Then connect it to your home theater receiver, and route the signal to your TV. For TVs with a coaxial digital output, connect to the receiver’s RCA inputs via a coaxial digital to RCA converter box. Components include other video input options, so make sure that they're evenly spaced and not overcrowded.
Connections to make
There’s no standard set of audio output jacks for TVs. Likewise, there are no standard minimum input jacks for home stereo audio/video receivers as well. Amplifiers, on the other hand, usually have RCA input jacks. Note that complete HD system requires a HD sound system, a source of HD content, and proper setup connection with components such as HD cable or satellite box. Optical audio sends the sound signal as a series of light pulses so do your best to not bend the cable or it won't work properly. Whichever connecting method you select you'll need to update your TV sound setting.
The wire runs from the back of the speaker to the receiver's “Audio Output” ports. Connect one wire to the red “input” on your speaker and the red “output” on the receiver and do the same with the black end to connect your speaker.Some modern speakers have plugs instead of speaker wiring. In this case, the wires are color coded for easy access. The average home theater setup includes speakers, a receiver, some form of video input (e.g., a DVD player or a game console), and a television. Using an HDMI-ARC connection will let you connect your TV to your receiver for both video and audio purposes with a single cable.
Set up your home theater system with separate components
The subwoofer brings the big, gut-trembling bass notes and works best up against a wall. Try to fit it near the middle of the wall if you can, but it can be to the side if the TV is in the way. This is where you'll place a soundbar if applicable to you. Many people mount this speaker just above the TV if they have room.
This will give you a better and richer sound quality than the RCA connection option. If you have a cable device, satellite receiver, or streaming device you may be able to get a surround sound audio signal from those. To do so you’ll need to connect the digital or HDMI audio outputs to your receiver’s input as needed using an HDMI cable.
How to Connect a Television to a Stereo System
Connect your Blu-ray player to your TV using an HDMI cable. This will transmit both the video and the audio to your TV with one cable. Connect the AUDIO OUT ports on your DVD player to the AUDIO IN ports on your TV with standard audio cables . 4) If your audio system does not have the EasyLink autostart feature, manually switch the audio system on and select the input on the audio system to which the TV is connected. If you select Audio out , audio will be output from both the TV and external output device.
You don't need to use an audio receiver with a soundbar. To connect either a CD or record player to an AV receiver, use the player's analog or digital audio outputs. If you have a CD recorder, connect it to the AV receiver through the Audio Tape Record/Playback input/output loop connections . Digital outputs are those where an audio signal is transmitted as digital signals made up of bits of information. Some home receivers with the same connections can connect to these directly and “decode” them to be amplified and drive speakers. TV must be properly connected to components such as sound system and cable or satellite box and that’s why you should learn more about cable types necessary that will help hooking up flat screen to entertainment center.
For a DVD player, connect one of the player's video outputs to the DVD video input on the AV receiver. If your DVD player has an HDMI output, use that option. If your DVD player doesn't have an HDMI output, use another available video output combined with a digital optical/coaxial cable from the player to the AV receiver. In either case, the RCA stereo input option is the easiest and least expensive. In both cases you’ll have to set your receiver to the AUX , “digital in”, or a similar input mode to get sound. That’s because home stereo receivers with inputs must be switched over to take the signal from those inputs and amplify it to power your speakers.
Before you start turn off and unplug all components before making connection and do not turn on the TV until connection setup is completed. If you still do not hear anything, check whether your TV has an option called PCM . There is usually an option to delay audio to sync to video output if this is the case. Digital to analog audio converters use a small AC/DC power supply and convert the digital signal to RCA outputs as needed.
Below is a general outline of how to connect these different components. The first step is knowing what components you'll need for your home theater. Below is a list of standard components to consider.
Read the owner's manual and illustrations for your components, paying close attention to the connection and setting options. A home theater utilizing 5.1 channels is the most commonly used setup. To complete your home theater setup, place and connect the speakers and subwoofer.
No doubt it will make home theater network system hookup easy even if you have never been interested in this stuff. Press Enter, scroll down to External Speaker, and press Enter. With this step you're also turning off your TV's internal speaker since you won't be using it. And the other end into an ARC HDMI port on your sound unit.
Hi, I'm Roy, the main content creator here on Home Theater Heroes. I'm an IT person by trade, but love entertainment like movies and video games. I've been messing around with home theater packages since my Dad's old, expensive custom Bose Lifestyle set up in the mid-90s. Stick around to see fun technical projects and new stuff I'm learning about home theaters. Denon AVR-X4500H is a relatively newer model but still comes at a great price point. It provides powerful sound, especially on the low end, which some other receivers are not capable of doing.
Movies and TV - Most movies are multi-track , meaning 5 or 7 smaller speakers will create a more immersive movie watching experience than 2-3 expensive, large speakers. If you plan on using full surround sound, leave a few feet between the back of your couch and the wall for the speakers to sit. Determine where you want to set up your home theater. It's easy to get carried away while buying equipment only to realize that your TV and/or speakers are too big for your living room!
No comments:
Post a Comment